The bolt pattern for a 2007 Ford Crown Victoria is 5x114.3 (or 5x4.5 ), indicating that each wheel has five bolts (or lugs) that are arranged circularly with a 114.3 mm (4.5 inches) diameter.
One of the simplest yet cool 2007 Ford Crown Victoria mods is to replace stock wheels with bigger aftermarket options.
However, before you switch, you must know your 2007 Ford Crown Victoria lug pattern to confirm compatibility with the new set of wheels. But even if the current bolt pattern of your 2007 Ford Crown Victoria and the new wheels do not match, consider converting to the required scheme using the wheel adapters.
Also, new rims must sit within the wheel offset range, and the 2007 Ford Crown Victoria's stud must fit onto the hub bore. Use the measurements below while searching for new wheels.
A bolt pattern, or lug pattern, is a two-number system used to measure the imaginary circle (PCD) formed by the lug holes at the center of a wheel. The first number counts the holes in the wheel, while the second number indicates the pitch circle diameter in mm or inches.
Measures the distance from the hub mounting surface to the center of the wheel. It is vehicle specific.
A machined opening in the center of the wheel. It must be "Hub Centric" to reduce vibration.
The outer diameter of your wheel stud threads in either metric (M12, M14, etc.) or standard units (1/2", 9/16", etc.).
Dimensions of the stock tires, including its width, aspect ratio (sidewall), and diameter.
Dimensions of rims recommended by the manufacturer.
2" Long 2 Piece Design lug nut The 2-piece design refers to a thin metal cap on the Lug Nut that protects against false torque readings resulting from the wheel stud contacting the inside of...Check price on
White Knight has established a solid reputation of providing the automotive aftermarket industry with quality products at competitive prices. Specially formulated corrosion protection is app...Check price on